Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco Unified Communications Manager 10.0 - New Features Google Hangout Q&A Session

Tohsheen BazazEngineer, Customer Support, Cisco

Welcome the Cisco Support Community Google Hangout Q&A Session about Cisco Unified Communications Manager 10.0.  If you have any questions regarding the product or the content of the Google Hangout, please post them here. 

Cisco UCM Product: http://cs.co/cucm10 http://cs.co/cucm10

Google Hangout Page : https://plus.google.com/events/cmt40r73djuhnauh5blg31k13ic

23 REPLIES

Good session Tohsheen,Thank

Good session Tohsheen,

Thank you so much, I need to start gathering information about CUCM usage, including trunk links.

I know CAR is there, but I dont quite like it, v10 is going to have something better?

If not, what you can suggest?

 

Thank you! :)

New Member

Hi RolandoThere is nothing

Hi Rolando

There is nothing specific in CUCM v10 which will help you differently that v9 with respect to trunk usage.

Let me know what difficulties do you face with CAR,  I will try to address them.

New Member

Tohsheen, Thanks for answer

Tohsheen,

 

Thanks for answer the questions

New Member

Question 1 from Google+ The

Question 1 from Google+ 

The additional route groups for de device pool MUST be emergency? 

New Member

The additional local route

The additional local route groups dont have to be emergency. They can be anything.

New Member

Question 2 from Google+At the

Question 2 from Google+

At the momento i'm using cucm 7.1.5 .  This instalation is an upgrade from ccm 4.3 . At that time, cucm keept the IPMA and attendant console functionalities on the 7.1 .

Is it possible to upgrade from 7.1 to 10 and if so, will IPMA and attendant console keep working?

 

New Member

Is licensing different? Will

Is licensing different? 
Will ver10 work with CUP ver 9?
What new features will end users notices?

New Member

1.Licensing on v10 is not

1.Licensing on v10 is not different from version9. But yes it has been renamed to Cisco Prime License Manager.

If you compare licenses on v10 to CUCM version 8.X or earlier, then in that case you will see a BIG change. If you need more info about this change please do let me know.

2.IM and Presence Service Release 10.0(1) is supported only with Cisco Unified Communications Manager Release 10.0(1).

Note IM and Presence Service Release 9.1(x) is supported only with Cisco Unified Communications Manager Release 9.1(x).

Source: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/10_x/CUCM_BK_CD1DB914_00_compat_matrix/CUCM_BK_CD1DB914_00_compat_matrix_chapter_011.html#CUP0_RF_SECB5848_00

3. End user features include SAML SSO, vido on hold (contact center environment), etc. This session on routing enhancement covered urgent priority which would also translate to end user experience as they might not face the delay in call completion.

New Member

IPMA is still supported on UC

IPMA is still supported on UC 10.X.

BUT inherent attendant console went out of support almost 4 years back and is no longer supported.

Cisco recommends administrators to move to CUEAC, CUBAC OR CUDAC.

This might help you push this through your organization:

http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-mobile-communicator/end_of_life_notice_c51-499091.html

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmfeat/fsgd-712-cm/fsccmac.html

From the document:

If you want to use attendant console functionality after a Cisco Unified Communications Manager 7.1(2) installation/upgrade, Cisco recommends that you use the Cisco Unified Business Attendant Console, Cisco Unified Enterprise Attendant Console, or the Cisco Unified Department Attendant Console.

New Member

Question 3 from Google+My

Question 3 from Google+

My cucm is working on a physical machine. Is it possible to upgrade to a virtual machine?

New Member

Yes it is possible and if you

Yes it is possible and if you would like to know the exact steps, please contact TAC.

Please note TAC will only provide you with relevant steps and not carry this activity out for you.

If you want Cisco to do this whole migration then you would need to contact the PDI team. This is their web-page

http://www.cisco.com/web/partners/tools/pdihd.html

New Member

Question 4 from Google+How

Question 4 from Google+

How can me migrate from version 9? CUCM v10 works with UCCX v9?

New Member

Licensing on v10 is not

Please refer this document to check the UCCX and CUCM compatibility.

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf

UCCX v9 is supported for CUCM 10.X

BUT note: Install ES03 or later version on Unified CCX 902SU1 to work with Unified Communications Manager 10.0(1).

New Member

Question 5 from Google+Is any

Question 5 from Google+

Is any feature to gather metric about the usage of the system? (This includes trunk links?)

New Member

There is nothing specific in

There is nothing specific in CUCM v10 which will help you differently than v9 with respect to trunk usage.

Let me know what difficulties do you face with CAR,  I will try to address them.

New Member

For urgent priority to take

For urgent priority to take effect do we need to restart any service ?

New Member

There is no service restart

There is no service restart required for this functionality to work.

 

New Member

Is multiple LRG a feature

Is multiple LRG a feature already turned ON or do we need to turn to ON on CUCM ?

New Member

There is no service restart

There is no service restart required for this functionality to work.

When you add LRG under call routing section, they automatically get added to device_pools.
 

New Member

Can one translation-pattern

Can one translation-pattern access another translation-pattern  ?

New Member

Yes, this is possible. make

Yes, this is possible. make sure that there is no issue with the CSS.
Also check out the new feature on translation pattern 10.X which was presented yesterday

New Member

Does the new 10.X release

Does the new 10.X release supported on  MCS servers ?

New Member

10. X release is supported

10. X release is supported only on virtualized platform.

refer this link

http://www.cisco.com/c/en/us/products/collateral/unified-communications/7800-series-media-convergence-servers/prod_brochure0900aecd8062a4f9.html

946
Views
0
Helpful
23
Replies