Not sure if this is the right forum for this question, but if not perhaps you can point me in the right direction...
Our company recently purchased Cisco MeetingPlace, and as a member of our training team, I have been included in some testing and training of the product.
We are using Lotus Notes for our email and during our testing phase have found that when we click on the Meeting URL in the email invitation, it tries to open in Lotus Notes, which causes and error.
Is there a setting that the Administrator can set to have the link open using Internet Explorer?
If not, we need to send additional instructions to the user to copy and paste the Meeting URL into an Internet Explorer Broweser. Can email invitation be customized to include this or any other applicable instructions for the user?
Any ideas or suggestions would be greatly appreciated - thanks in advance.
This should be a Notes issue and not a meetingplace express problem. Notes is intercepting the link and trying to open it. How to change this in Notes is explained in this link. Unfortunately you will have to set this up on each individual pc. I am not a Notes/Domino expert to say if you can toggle this setting using a policy push to all the end user PCs.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...