Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco Unified Mobility Advantage / Cisco ASA Deployment Question

Hi all,

I was wondering, whether if we have to configure ASA' s outside interface with a real IP address according to the configuration guide below ?

http://www.cisco.com/en/US/docs/voice_ip_comm/cuma/7_0/english/install/guide/cuma_70_IAG_02_ASA.html

We were planning on positioning ASA behind a Juniper SSG20 firewall which has a static NAT configuration such as 81.8.x.y to 192.168.10.66 (which is ASA' s outside interface) ? Will this work as expected ?

Thanks in advance.

Dumlu

Everyone's tags (1)
1 REPLY
Red

Re: Cisco Unified Mobility Advantage / Cisco ASA Deployment Ques

The main purpose of ASA is TLS proxy.  Technically speaking, you could put the ASA behind a NAT device as long as it can establish TLS connection with endpoints (cell phones).

The down side is: since this is not an "example" scenario, you'll have to fine tune the ASA config, which adds more complexity to troubleshooting.

Michael

http://htluo.blogspot.com

437
Views
0
Helpful
1
Replies