Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cisco unified operations manager2.0.1


I want to add an ip phone to operations manager...i looked for the community string configuration option in the ip phone...but there is no option in the ip can i give the community string for the ip phone...the ccm6.0 which the ip phone is registered is being monitored by the operations there any option in the ccm6.0 to give community string to the ip phone...please help me.................

New Member

Re: cisco unified operations manager2.0.1

OM does not use the community string of the phone to add it as a node, rather it uses the CM Subscriber database, and CDP to add the IP Phone as a node. If you want to add pones from other UCM clusters then you must configure Operations Manager to Pull SNMP Data from each node of the second cluster. At this time OM Will retrieve the number of configured & registered Devices. Hope this Helps,



UOMGR 2.0.1

UCCE 7.2

UCM 5.2

Unity Connections 2.0


New Member

Re: cisco unified operations manager2.0.1

Thank you for your kind information..

Can u please tell me how can i add the ipphone into the OM..because ucm is not showing any associated ipphones in there anything i have to do in ucm admin page or OM page inorder to add the ipphone...??

New Member

Re: cisco unified operations manager2.0.1

Ok here you go, OM queries UCM configuration database via AXL link, this means in order for OM to read the configuration database when you configure UCM on your OM server you must supply two things SNMP Credentials, and the HTTP User/admin credentials (commonly known as the "ccmadmin" account) you can find the details of this configuration here:

Reference Section 3.1.5 "Cisco Callmanager"

Hope this helps.