The UPM is really just a front end for CUCM with templates. It's a tool for "junior" admins to help out with setting up phoens/lines/vm boxes without actually accessing the CUCM or Unity boxes. The administrator can setup templates and grant access to the "junior" admins or other staff members add/remove phones/lines/vm boxes, etc.
If you change a setting a phone and save it, it will push it out to CUCM and CUCM will update the phone.
Ok, I don't want to describe my question again, could you show me example of changing description field on h.323 gateway configuration? Or changing of phone's setting without subscriber (user attached to this phone)?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...