I'm having issues logging back into the system administration page. My default subscriber template was set to put all subscribers in the "default administrator" COS, so I moved all subscribers to a new COS...including the example administrator. Please Help! How do I assign a subsriber back to the default administrator COS without being able to log in to the SA?
Probably the easiest way to assign a subscriber to a COS with administrator rights would be to edit the a subscriber record in the UnityDB SQL database.
From SQL Enterprise Manager expand the UnityDb and find the Cos table.
Right click on the Cos table and choose Return all rows. This will open the table. In the CosObjectId column, copy the CosObjectId for the defaultadministrator COS and close the table.
Right click on the Subscriber table and choose Return all rows. Find the subscriber you wish to assign to the defaultadminstrator COS and in the CosObjectId column, paste in the CosObjectId you previously copied.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...