Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Cisco unity 7.0

                   Hi All ,

                            i am going to install cisco unity  7.0  .can any one share with me exact installation guide plus any additional tips.

Regards,

Shib

Everyone's tags (3)
6 REPLIES
Bronze

Cisco unity 7.0

Hall of Fame Super Silver

Cisco unity 7.0

Is there a reason you are installing Unity vs. Unity Connection? Unity is a dead product and version 7 is few years old.

HTH,

Chris

Community Member

Cisco unity 7.0

Actually the reason is that we have two  Cisco unity server(installed) and need to make failover  b/w them but

the problem is that the pubshiler and subscriber database are in different partitions .so i need to unistall subscriber and re-install in same partition in order to run failover wizard.

Hall of Fame Super Silver

Cisco unity 7.0

So, do you have 2 separate Unity Servers now? But you require failover config?

Not sure why you reference partitions here, as I don't think Unity would care which partition the app is installed in.

Also, there is not concept of Pub/Sub in Unity, there is Primary and failover server.

I suggest you go through the extensive install guide and pay attention to the failover server install.

HTH,

Chris

Community Member

Cisco unity 7.0

Yes we have two separate unity server but the second is not live just installed . Actually i was running failover wizard  in primary at time there is a notification that partitions should be same of  both server ...

Re: Cisco unity 7.0

What you are seeing lines up with the requirements specified for Unity failover configurations.  For your installation with 7.x, you should follow the 5.x documentation as the products are essentially the same.  You will want to select the applicable installation guide for your setup here:

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html

Hailey

295
Views
7
Helpful
6
Replies
CreatePlease to create content