IBM Lotus Domino Is Not Supported for Use with Cisco Unity 8.x
Using IBM Lotus Domino as the message store is not supported with Cisco Unity version 8.x. Consequently, IBM Lotus Domino Unified Communications (DUC) for Cisco is not supported with version 8.x, and installing IBM Lotus Notes on a Cisco Unity version 8.x server is not supported.
IBM Lotus Domino continues to be supported with earlier versions of Cisco Unity. In addition, Cisco Unity Connection supports IBM Lotus Notes access to Connection voice messages by using ViewMail for Notes. See the following documentation:
•For compatibility information, see Compatibility Matrix: Cisco Unity Connection and the Software on User Workstations at http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/compatibility/matrix/cucclientmtx.html.
•For information on ViewMail for Lotus Notes, see Release Notes for Cisco Unity Connection ViewMail for IBM Lotus Notes Release 8.0(1) at http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/vmn/release/notes/801cucvmnrn.html.
Software Requirements—Message Store •Supported Exchange Configurations—Message Store •Required Exchange Software and Licenses—Message Store •Minimum Exchange Service Packs Required—Message Store •Recommended Exchange Service Packs—Message Store •Exchange-Related Considerations—Message Store
If you're looking to upgrade and keep on Domino, the latest is 7.X
Software Requirements—Message Store
IBM Lotus Domino and Microsoft Exchange are qualified for use as the message store with Cisco Unity 7.x. See the applicable section: •Domino Requirements—Message Store •Exchange Requirements—Message Store
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...