This shows CUCM 9.0(x) is compatible but there is nothing about CUCM 10. I was just wondering if there is a newer matrix out there that shows CUCM 10 working with Unity 8 or if they are just not compatible.
I don't think the testing and compatibility info would ever be done between these two versions due to the End of SW maintenance date shown below;
Table 1. End-of-Life Milestones and Dates for the Cisco Unity 8.0
End-of-Life Announcement Date
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.
August 1, 2011
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
January 30, 2012
Last Ship Date: App. SW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
April 29, 2012
End of SW Maintenance Releases Date: App. SW
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
January 29, 2013
End of New Service Attachment Date: App. SW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
January 29, 2013
End of Service Contract Renewal Date: App. SW
The last date to extend or renew a service contract for the product.
April 27, 2014
Last Date of Support: App. SW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
As Rob said, Unity is pretty much history so you likely won't see any notes on compatibility with updated CUCM versions going forward. With that said, the TSP is the main concern in terms of compatibility. What I would tell you is that if you are running the latest TSP then it will probably work just fine. However, you wouldn't get any support if it does not. The other thing I would tell you is that you should encourage your client to migrate over to Unity Connection. You can migrate over the data really easily with COBRAS and get them onto a supported product that has a lot of upside in terms of its architecture.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...