Cisco Unity Connection 1.1 Transfer Option After Greeting
I need to transfer the Call to any Directory number after the Main Greeting is played & user press 0 ?if they know the extension?, and in caller input Keys I configured? 0 ?value to Caller System Transfer & in the Port Status Viewer it showing that it transfer to Caller System Transfer & I edit restriction table to transfer all Calls to any DNs which is configured & valid in Phone System Call Manager 4.1 by using this mask? 8??? ?Such as DN = 8124, also I configured one routing rule as following:
Call Type: Any.
Dialed Number: Any.
Calling number: 0.
Send a call to: system Transfer.
Schedule: all hours.
But when you put in the extension, you get the message saying "Sorry that is not a valid entry?.
There are errors in Windows event viewer Error ID :1002 & Source : CiscoUnity_PhraseServer.
Warring message, Warning ID: 109, Source: CiscoUnity_TSP Description: Cisco Unity-CM TSP device 6 (Cisco Unity Port CCM-1-1): Failed blind transfer to extension 8124.Recorder tone detected.
Re: Cisco Unity Connection 1.1 Transfer Option After Greeting
The restriction table wouldn't be involved here - clearly the number is being allowed by Unity and a transfer attempt is being made - thuse the restriction table allowed the number. Further, if the number was not allowed by the RT you'd get a clear indication of that in the conversation - it says that the number is not allowed.
CM is kicking back an error at the attempt. Check to be sure that the lines assigned for Unity's ports are allowed to make calls to the extensions you want - it's common to restrict voicemail ports from making transfers to prevent toll fraud.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...