Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco Unity

Hi,

I have a customer that has the Cisco Small Business edition server. It is a 7828-I4 server running both CUCM and CUC version 8.6. They had a power issue and the server did a hard shut down. A co-worker ran a recovery disk of an older version and got CUCM back up. CUC would not come back up. I came and ran the right version recovery disk. Did a reboot after it was done and CUC still doesn't come up. I can login to CUCM just fine. When I do a utils system list it shows all the service are not started. Is there any way to start those services?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Plenty of times power

Plenty of times power failures will cause the system to stop working all together, and even if you manage to get it back to work with the recovery disk, it's strongly recommended to perform a DRS restore to have a system that doesn't have any problems.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
4 REPLIES
Cisco Employee

If the recovery disk failed

If the recovery disk failed to fix the issues, chances are you will need to restore your server to get it back to a fully functional system.

What happens if you try to start the services via CLI?

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

I tried restarting Connection

I tried restarting Connection DB, but it didn't recognize the command. I tried a couple other services. They just kept telling me that is wasn't valid service.

Cisco Employee

Plenty of times power

Plenty of times power failures will cause the system to stop working all together, and even if you manage to get it back to work with the recovery disk, it's strongly recommended to perform a DRS restore to have a system that doesn't have any problems.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Jaime,

Jaime,

You were right. I just had to end up rebuilding the server and doing a restore on it. Once I did that I was able to get into CUC.

9
Views
5
Helpful
4
Replies