Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Cisco Employee

Cisco Video Conference Bridge(IPVC-35xx) registration is shown as "unkown"

Hi,

I have configured Video Conference Bridge(IPVC-35xx) and call manager shows registration as "unknown" and ip address as "unknown".

Even in Video MCU status to call manager is shown in red colour. Please let me know how to rectify this.

Best Regards,

Girish

2 REPLIES
Cisco Employee

Cisco Video Conference Bridge(IPVC-35xx) registration is shown a

Hi Girish,

To get the appropriate help, please try moving this post to Unified Communications Applications support community. This community is observed by Cisco WebEx Meetings Server and Cisco Unified MeetingPlace experts that might not have the skill set you need for this issue.

Thank you.

-Dejan

VIP Super Bronze

Cisco Video Conference Bridge(IPVC-35xx) registration is shown a

This is only relevent if you want the MCU to service ad-hoc conference calls from IP phones (requires SCCP). If you just want rendevious conferencing where you dial into a conference number, you can use SIP or H323 instead of SCCP. The bridge will support both if you're willing to dedicate a portion of it's capacity to SCCP.

Here's the config guide:
http://www.cisco.com/en/US/docs/video/cuvc/5_6/mcu/3545/configuration/guide/protocols.html#wp1094762

You'll also need to create a service for SCCP if one doesn't already exist:

http://www.cisco.com/en/US/docs/video/cuvc/5_6/mcu/3545/configuration/guide/services.html#wp1081334

Lastly, be advised that this product is EoL.

Please remember to rate helpful responses and identify helpful or correct answers.

179
Views
0
Helpful
2
Replies
CreatePlease to create content