Hi, I have installed the Cisco Viewmail on a pc and when I open up outlook and go to tools to configure it, it is not there and it acts as though it is not installed. I have removed and reinstalled several times with the same results. Any suggestions?
Make sure you are installing minimum ViewMail version 5.0 for Outlook 2007 support. Also, from Outlook 2007, go to Tools - Disabled Items. See if ViewMail extension has been disabled. If so, please re-enable it. Another thing to check is user must have Local Admin rights on the PC. Let us know back.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...