I got one CiscoUnity_Miu Error Message on Unity server 4.0(4)SR1, please download the log in attachment for detail. What could be the reason for this? (This system also have MWI delay problem at this time.)
You might check your PBX - i.e. if you have CallManager, check the Application event log to see if the phone disconnected/reconnected to CCM - Type 3 event record. We have seen these errors when the phone loses its heartbeat to CallManager as the caller was getting forwarded to voicemail. In our case, we have CCM 4.1(3) running on an older model server - HP DL380G1 that goes high cpu when Trend antivirus scanning is running. Fortunately we are in the process of moving to a new cluster with new servers :-)
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...