Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Click-to-call - zero for external calls

HI,

i'm using CLICK TO CALL to dial numbers from web page.

I read numbers from a db but they haven't zero for external calls and i can't modify the db so i asky you:

Can I post to clickToDIal application a param (0) to add to number for external call?

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Click-to-call - zero for external calls

Indeed application dial rules is what you can use. It is explained here:

http://tools.cisco.com/squish/56877

You can also disable dial rules and configure fixed values as outlined here:

http://tools.cisco.com/squish/F1DdD

2 REPLIES
VIP Super Bronze

Re: Click-to-call - zero for external calls

Yes. Configure Application Dial Rules and CUCM will modify the number before dialing it. Also do not forget to enable the Apply Application Dial Rules on SOAP Dial Request service parameter on the WebDialer service.

Please remember to rate helpful responses and identify helpful or
Cisco Employee

Re: Click-to-call - zero for external calls

Indeed application dial rules is what you can use. It is explained here:

http://tools.cisco.com/squish/56877

You can also disable dial rules and configure fixed values as outlined here:

http://tools.cisco.com/squish/F1DdD

386
Views
5
Helpful
2
Replies