Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Clocking configuration on 7200

All,

I have a 7200 VXR and I need to make one of the E 1 controller be the primary/common clock source for the router. I configured

frame-clock-select 1 E1 6/0  on the router and if I do show network-clock, I do not see  Controller E1 6/0 is not the clock source as shown below..

sh network-clocks
Priority 1 clock source: not configured
Priority 2 clock source: not configured
Priority 3 clock source: not configured
Priority 4 clock source: not configured
Priority 5 clock source: Local oscillator
Current clock source:Local oscillator, priority:5

Can some one tell what am I missing ?

Rav

301
Views
0
Helpful
0
Replies
CreatePlease to create content