Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CM 4.1(3)sr5b on Win2003?

Hi,

Can anyone show me some proof that CM ver 4.1(3)sr5b will work on Windows 2003?

We are planning to upgrade this week to Win 2003 and looking if this upgrade will give us some issue.

tia

Robert

4 REPLIES
Gold

Re: CM 4.1(3)sr5b on Win2003?

Well .. this would not work. OS 2003.1.1 and above is only supported with CM 4.3 onwards only. Therefore you cannot install CM 4.1(3) with Windows 2003

Re: CM 4.1(3)sr5b on Win2003?

It will not work, Win 2003 is only supported on CCM 4.3, you can see that on the Release notes:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/4_3/rel_note/431cmrn.htm#wp2566469

In other words, do not perform that upgrade, it will break your system.

HTH

//Jorge

New Member

Re: CM 4.1(3)sr5b on Win2003?

Thanks for the reply.

Now we are ready for the upgrade.

Can anyone give me some good procedure or step by step on how to install CCM 4.3(2) on a new win2003 server.

tnx

Hall of Fame Super Red

Re: CM 4.1(3)sr5b on Win2003?

Hi Robert,

These are probably two of the better places to start the Upgrade path :) Pretty good docs;

Cisco Unified CallManager Documentation Guide for Release 4.3(1)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/docguide/4_3/dg431.html

Upgrading Cisco Unified CallManager, Release 4.3(1)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/upgrade/4_3_1/upg431.html

Hope this helps and best of luck!

Rob

129
Views
0
Helpful
4
Replies