Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CME 10.5 CME SIP Phone GUI access

Dear All,

I am running CME 10.5 and I have 8811 & 8831 SIP phones.

Phones are registered but I have couple of issue with these Phones.

1) Can I have GUI access of SIP phones ?  Like for SCCP phones we can access through GUI.

If there is any document which says it's possible then please share the same.

I am specifically looking for SIP phones. GUI for my SCCP phones are working perfectly fine.

Below is my config for voice register global

voice register global
 mode cme
 source-address 10.105.61.2 port 5060
 timeouts interdigit 6
 max-dn 100
 max-pool 100
 authenticate register
 timezone 35
 time-format 24
 date-format D/M/Y
 voicemail 299
 tftp-path flash:
 file text
 create profile sync 0201584232787866
 ntp-server 10.114.80.17 mode directedbroadcast
 conference hardware
 camera
 video
!

Regards,

Vishal

3 REPLIES

I have used this process for

I have used this process for 9971 SIP phones on CME and it works fine.

https://supportforums.cisco.com/discussion/12342791/enable-web-access-9971-connected-cme

Can you give it a go and see if it works for your 88XX phones?

New Member

Hello Jonathan, 

Hello Jonathan, 

I am looking for GUI platform for SIP phones which allow me to do changes of speed dials, forward all, etc, features. 

Please let me know if you have any idea on the same. 

Thanks, 

Vishal

Hi Vishal,

Hi Vishal,

There is no ability for the CME GUI to configure SIP phones that I am aware of.

22
Views
0
Helpful
3
Replies