Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CME 2801 and UC 520

Hi, i have recently been hired by a firm as an intern working on IP telephony and call manager. i dont have much experience in this field and i really am in need of some help. i hav a situation. I have a 2801 router with CME 3.2 on it. it has 2 ip phones connected to it both can call each other. i also hav a UC 520 whch also has two ip phones connected to it and even these phones can communicate with each other . I wanted to know if there is any way by which i can connect the 2801 to UC 520 in such a way that the ip phones connected to 2801 can call the ones connected to UC520. plz let me know. the ip phones i have are cisco 7960,7940

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: CME 2801 and UC 520

Hi!

Treat the UC500 as another CME. You will need to have connectivity between both routers and setup dial-peers to route calls between both of them.

Check these links, might be helpful:

*** Dial Peer Overview ***

http://www.cisco.com/en/US/docs/ios/voice/dialpeer/configuration/guide/vd_dp_overview.html

*** Dial Peer Configuration Examples ***

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/dial_peer/dp_app_a.html

Hope this helps!

Regards,

Tere.

Regards, Tere. If you find this post helpful, please rate! :)
2 REPLIES
Cisco Employee

Re: CME 2801 and UC 520

Hi!

Treat the UC500 as another CME. You will need to have connectivity between both routers and setup dial-peers to route calls between both of them.

Check these links, might be helpful:

*** Dial Peer Overview ***

http://www.cisco.com/en/US/docs/ios/voice/dialpeer/configuration/guide/vd_dp_overview.html

*** Dial Peer Configuration Examples ***

http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/dial_peer/dp_app_a.html

Hope this helps!

Regards,

Tere.

Regards, Tere. If you find this post helpful, please rate! :)
Cisco Employee

Re: CME 2801 and UC 520

just to add to the great info from Tere

Q. Can the Cisco Unified Communications 500 Series be networked with Cisco Unified CME or Cisco Unified Communications Manager?

A. The Cisco Unified Communications 500 Series can be networked with an integrated services router-based Cisco Unified CME, but the Cisco Unified Communications 500 Series does not work with Cisco Unified Communications Manager.

Cisco Unified Communications 500 Series for Small Business

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps7293/prod_qas0900aecd806a3cfa.html

Just make sure to configure destination-pattern under the dial-peer voip on each system to point to the DNs configured on the other box

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
171
Views
8
Helpful
2
Replies