Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME 4.2 meet-me and ad hoc conferencing

Hello I'am trying to get meetme conferencing to work and I'am not sure my configuration is correct. Now after adding in this configuration it seems that ad-hoc is not working either. Is there anything I'am missing? Thanks

voice-card 0

dspfarm

dsp services dspfarm

sccp local Loopback0

sccp ccm 10.1.1.1 identifier 1

sccp

!

sccp ccm group 1

associate ccm 1 priority 1

associate profile 1 register confdsp1

!

dspfarm profile 1 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 2

associate application SCCP

telephony-service

sdspfarm units 1

sdspfarm tag 1 confdsp1

conference hardware

ephone-dn 17 dual-line

number 1020

description *** Meet Me ***

conference meetme

!

!

ephone-dn 18 dual-line

number 1021

description *** Meet Me ***

conference meetme

!

!

ephone-dn 19 dual-line

number 1022

description *** Meet Me ***

conference meetme

!

!

ephone-dn 20 dual-line

number 1023

description *** Meet Me ***

conference meetme

!

!

ephone-dn 21 dual-line

number 1024

description *** Meet Me ***

conference meetme

!

!

ephone-dn 22 dual-line

number 1025

description *** Meet Me ***

conference meetme

!

!

ephone-dn 23 dual-line

number 1026

description *** Meet Me ***

conference meetme

!

!

ephone-dn 24 dual-line

number 1027

description *** Meet Me ***

conference meetme

!

!

ephone-dn 25 dual-line

number 1028

description *** Meet Me ***

conference meetme

!

!

ephone-dn 26 dual-line

number 1029

description *** Meet Me ***

conference meetme

2 REPLIES
New Member

Re: CME 4.2 meet-me and ad hoc conferencing

I just ran this command.

Total number of DSPFARM DSP channel(s) 2

UC520-TLC#show dspfarm all

Dspfarm Profile Configuration

Profile ID = 2, Service = TRANSCODING, Resource ID = 2

Profile Description :

Profile Service Mode : Non Secure

Profile Admin State : UP

Profile Operation State : RESOURCE ALLOCATED

Application : SCCP Status : NOT ASSOCIATED

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 1

Number of Resource Available : 1

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30

Codec : g711alaw, Maximum Packetization Period : 30

Codec : ilbc, Maximum Packetization Period : 60

Codec : g723r63, Maximum Packetization Period : 60

Codec : g723r53, Maximum Packetization Period : 60

Codec : gsmamr-nb, Maximum Packetization Period : 60

Codec : g729ar8, Maximum Packetization Period : 60

Codec : g729abr8, Maximum Packetization Period : 60

Dspfarm Profile Configuration

Profile ID = 1, Service = CONFERENCING, Resource ID = 1

Profile Description :

Profile Service Mode : Non Secure

Profile Admin State : UP

Profile Operation State : RESOURCE ALLOCATED

Application : SCCP Status : NOT ASSOCIATED

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 1

Number of Resource Available : 1

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required

Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required

Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729abr8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required

SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

0 1 21.4.3 UP N/A FREE xcode 2 - - -

0 2 1.1.137 UP N/A FREE conf 1 - - -

Total number of DSPFARM DSP channel(s) 2

UC520-TLC#

I added a transcoder and a profile for it. i still show not associated though.

sccp local Loopback0

sccp ccm 10.1.1.1 identifier 1

sccp

!

sccp ccm group 1

associate ccm 1 priority 1

associate profile 2 register mtp001de5e1d5f8

associate profile 1 register confdsp1

!

dspfarm profile 2 transcode

codec g711ulaw

codec g711alaw

codec ilbc

codec g723r63

codec g723r53

codec gsmamr-nb

codec g729ar8

codec g729abr8

maximum sessions 1

associate application SCCP

do i need to bind it to the loopback? Thanks

Re: CME 4.2 meet-me and ad hoc conferencing

'show sccp' is a better command to use there.

As well when you define the ccm sccp address, you should add 'version 4.1' after the definition, as this is what CME expects. This requires removing it from the sccp ccm group and re-adding it.

I'm not sure if you were just making your config shorter, or if that's all you have under telephony-service, but this is mandatory configuration:

telephony-service

max-dn

max-ephone

ip source-address

hth,

nick

496
Views
0
Helpful
2
Replies