Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME 4.3 - IP phone to pickup FXS analog line

Hi all

I have a CME 4.3 system where I need to allow my users using 7911/7961 phones to be able to pickup the analog phone (configured on the FXS port on the router).

I have configured the voice port and dial peer for the analog extension but am not able to do any call pick up (both ways). It show "Invalid number" on the IP phone which I press pickup + XXXX. I know that the error may be due to the analog number is config on a dial peer and not a ephone-dn, so how can I make the pick up work?

*service directed-pickup is enabled.

Any advice is appreciated.

1 REPLY
New Member

Re: CME 4.3 - IP phone to pickup FXS analog line

I have managed to configure that.

Thanks.

181
Views
0
Helpful
1
Replies