Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME 8.5 Meetme, no conference bridge

Hi All,

The Meetme conference is not working, when show dspfarm, the status is ASSOCIATION IN PROGRESS as below:

router#sh dspfarm all

Dspfarm Profile Configuration

Profile ID = 1, Service = CONFERENCING, Resource ID = 1 

Profile Description : 

Profile Service Mode : Non Secure

Profile Admin State : UP

Profile Operation State : RESOURCE ALLOCATED

Application : SCCP   Status : ASSOCIATION IN PROGRESS

Resource Provider : FLEX_DSPRM   Status : UP

Number of Resource Configured : 8

Number of Resource Available : 8

Maximum conference participants : 8

Codec Configuration: num_of_codecs:5

Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required

Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required

SLOT DSP VERSION  STATUS CHNL USE   TYPE    RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

0    5   28.3.1   UP     N/A  FREE  conf    1      -         -         -       

0    5   28.3.1   UP     N/A  FREE  conf    1      -         -         -       

0    5   28.3.1   UP     N/A  FREE  conf    1      -         -         -       

0    6   28.3.1   UP     N/A  FREE  conf    1      -         -         -       

0    6   28.3.1   UP     N/A  FREE  conf    1      -         -         -       

0    6   28.3.1   UP     N/A  FREE  conf    1      -         -         -       

0    6   28.3.1   UP     N/A  FREE  conf    1      -         -         -       

0    6   28.3.1   UP     N/A  FREE  conf    1      -         -         -   

Running in Cisco Unity Express 8.5.1 and IOS is c3900e-universalk9-mz.SPA.151-4.M1.bin

Dspfarm configuration as below:

telephony-service

sdspfarm conference mute-on 111 mute-off 222

sdspfarm units 4

sdspfarm tag 1 POSNFKSA

conference hardware

max-ephones 300

max-dn 500

ip source-address 11.11.11.11 port 2000

timeouts interdigit 3

load 7916-24 B016-1-0-4.loads

load 7911 SCCP11.8-5-2S.loads

load 7975 SCCP75.8-4-1S.loads

time-zone 42

date-format dd-mm-yy

max-conferences 8 gain -6

transfer-system full-consult

secondary-dialtone 9

sccp local GigabitEthernet0/0

sccp ccm 11.11.11.11 identifier 1 priority 1 version 7.0

sccp

sccp ccm group 1

bind interface GigabitEthernet0/0

associate profile 1 register POSNFKSA

dspfarm profile 1 conference 

codec g711ulaw

codec g729ar8

codec g729br8

codec g729r8

codec g711alaw

maximum sessions 8

conference-join custom-cptone jointone

conference-leave custom-cptone leavetone

associate application SCCP

voice-card 0

dspfarm

dsp services dspfarm

ephone-dn  190  dual-line

number 1690 no-reg primary

conference meetme

Is there anything that i missing out?

4 REPLIES
Hall of Fame Super Red

CME 8.5 Meetme, no conference bridge

Hi there,

There are some good troubleshooting tips in this excellent doc from Tony @ Cisco

https://supportforums.cisco.com/docs/DOC-9464

Cheers!

Rob

PS: one thing I'm curious about is the "version" in

sccp ccm 11.11.11.11 identifier 1 priority 1 version 7.0

New Member

CME 8.5 Meetme, no conference bridge

but that is no option for enter version 8.5

Cisco Employee

CME 8.5 Meetme, no conference bridge

Have you tried leaving the version out of the command and doing a no sccp/sccp??

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

CME 8.5 Meetme, no conference bridge

If somebody have faced with the same trouble try to add:

sccp ccm group 1

associate ccm 1 priority 1

1753
Views
0
Helpful
4
Replies
CreatePlease login to create content