Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CME Conference Configuration

Hello All,

I have configured the hardward conference on CME for AD-Hoc. The conference profile is not able to register with CME. Please see the attached configuration & the error message below.

SCCP Admin State: UP

Gateway IP Address: 10.199.108.1, Port Number: 2000

IP Precedence: 1

User Masked Codec list: None

Call Manager: 10.199.108.1, Port Number: 2000

Priority: N/A, Version: 3.1, Identifier: 1

Transcoding Oper State: ACTIVE - Cause Code: NONE

Active Call Manager: 10.199.108.1, Port Number: 2000

TCP Link Status: CONNECTED, Profile Identifier: 10

Reported Max Streams: 6, Reported Max OOS Streams: 0

Supported Codec: g711ulaw, Maximum Packetization Period: 30

Supported Codec: g711alaw, Maximum Packetization Period: 30

Supported Codec: g729ar8, Maximum Packetization Period: 60

Supported Codec: g729abr8, Maximum Packetization Period: 60

Supported Codec: g729r8, Maximum Packetization Period: 60

Supported Codec: g729br8, Maximum Packetization Period: 60

Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30

Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30

Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30

Conferencing Oper State: ACTIVE_IN_PROGRESS - Cause Code: NOT_REGIS_WITH_CCM

Active Call Manager: NONE

TCP Link Status: NOT_CONNECTED, Profile Identifier: 2

Reported Max Streams: 32, Reported Max OOS Streams: 0

Supported Codec: g711ulaw, Maximum Packetization Period: 30

Supported Codec: g711alaw, Maximum Packetization Period: 30

Supported Codec: g729ar8, Maximum Packetization Period: 60

Supported Codec: g729abr8, Maximum Packetization Period: 60

Supported Codec: g729r8, Maximum Packetization Period: 60

Supported Codec: g729br8, Maximum Packetization Period: 60

Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30

Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30

Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30

Also, Attached is the debug of sccp details log.

Your help is always appreciated.

Thanks,

Yogesh Mhatre

3 REPLIES
New Member

Re: CME Conference Configuration

You are missing some command under the telephony-service configuration.

SUMMARY STEPS

1. enable

2. configure terminal

3. telephony-service

4. conference hardware

5. transfer-system full-consult

6. sdspfarm units number

7. sdspfarm tag number device-name

8. sdspfarm conference mute-on mute-on-digits mute-off mute-off-digits

Step 8 you are missing!

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeconf.html

New Member

Re: CME Conference Configuration

And I don't see the global command "dspfarm" to enable the dspfarm. I don't think your dspfarm is running!

New Member

Re: CME Conference Configuration

Hello Chris,

Thanks for your reply.

I tried the dspfarm command & the missing command, still i receive the same message.

Appreciate your help.

Regards,

Yogesh Mhatre

3792
Views
0
Helpful
3
Replies