cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2030
Views
0
Helpful
12
Replies

CME GUI Issue

abhishekbanik
Level 1
Level 1

hello,

when trying to access GUI from web page but getting blank page.

Configuration has been done on the router , also uploaded the GUI file on the flash memory, but when im trying to access through web browser nothing happens only blank page comes up.

Router - 2900

IOS version - 15.0(1)M3

CME Version - 7.1.1.0

GUI Version -7.1.0.0

Please let me know if im missing any steps

2 Accepted Solutions

Accepted Solutions

Have you done

show flash | i cme-gui-124-24T.tar or show flash | i gui  ?

If you've done last one, then you've installed gui for CME wrongly.

1. First you need to extract files to flash from TFTP:

archive tar /xtract tftp:///cme-gui-124-24T.tar flash:


2. Then enable http server


ip http server

ip http authentication local

ip http path flash:/gui


telephony-service

web admin system name password

then do show flash | i gui anf there should be file named telephony_service.html (or similar) - open it in browser.

View solution in original post

Any success here? Have tried my last recommendations?

View solution in original post

12 Replies 12

Gajanan Pande
Cisco Employee
Cisco Employee

Abhi,

Was a " Write Memory " & Router reboot tried ?

GP.

not yet can you please tell me the what does  "write memory" command do.

Thanks

Have you used tftp path command?

Which web page are you trying to access? (exact name of html file)

Hi ,

not yet tired tftp path command , can you please tell me what does this command do.

the page which i'm trying to access is https://routeripaddress/ccme,html

Hi,

can you posts "show flash | i gui" output.

voicelab#show flash | i cme-gui-124-24T.tar

8       829440 Mar 20 2012 08:48:36 cme-gui-124-24T.tar

Please find the output

Have you done

show flash | i cme-gui-124-24T.tar or show flash | i gui  ?

If you've done last one, then you've installed gui for CME wrongly.

1. First you need to extract files to flash from TFTP:

archive tar /xtract tftp:///cme-gui-124-24T.tar flash:


2. Then enable http server


ip http server

ip http authentication local

ip http path flash:/gui


telephony-service

web admin system name password

then do show flash | i gui anf there should be file named telephony_service.html (or similar) - open it in browser.

Any success here? Have tried my last recommendations?

Hi ,

Thanks a lot for your help , yes it worked

Good that it helped.

paolo bevilacqua
Hall of Fame
Hall of Fame

Which browser are you using ? Try firefox or older IE.

IE 8

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: