Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CME GUI Issue

hello,

when trying to access GUI from web page but getting blank page.

Configuration has been done on the router , also uploaded the GUI file on the flash memory, but when im trying to access through web browser nothing happens only blank page comes up.

Router - 2900

IOS version - 15.0(1)M3

CME Version - 7.1.1.0

GUI Version -7.1.0.0

Please let me know if im missing any steps

2 ACCEPTED SOLUTIONS

Accepted Solutions

CME GUI Issue

Have you done

show flash | i cme-gui-124-24T.tar or show flash | i gui  ?

If you've done last one, then you've installed gui for CME wrongly.

1. First you need to extract files to flash from TFTP:

archive tar /xtract tftp:///cme-gui-124-24T.tar flash:


2. Then enable http server


ip http server

ip http authentication local

ip http path flash:/gui


telephony-service

web admin system name password

then do show flash | i gui anf there should be file named telephony_service.html (or similar) - open it in browser.

CME GUI Issue

Any success here? Have tried my last recommendations?

12 REPLIES
Cisco Employee

CME GUI Issue

Abhi,

Was a " Write Memory " & Router reboot tried ?

GP.

New Member

CME GUI Issue

not yet can you please tell me the what does  "write memory" command do.

Thanks

CME GUI Issue

Have you used tftp path command?

Which web page are you trying to access? (exact name of html file)

New Member

CME GUI Issue

Hi ,

not yet tired tftp path command , can you please tell me what does this command do.

the page which i'm trying to access is https://routeripaddress/ccme,html

CME GUI Issue

Hi,

can you posts "show flash | i gui" output.

New Member

CME GUI Issue

voicelab#show flash | i cme-gui-124-24T.tar

8       829440 Mar 20 2012 08:48:36 cme-gui-124-24T.tar

Please find the output

CME GUI Issue

Have you done

show flash | i cme-gui-124-24T.tar or show flash | i gui  ?

If you've done last one, then you've installed gui for CME wrongly.

1. First you need to extract files to flash from TFTP:

archive tar /xtract tftp:///cme-gui-124-24T.tar flash:


2. Then enable http server


ip http server

ip http authentication local

ip http path flash:/gui


telephony-service

web admin system name password

then do show flash | i gui anf there should be file named telephony_service.html (or similar) - open it in browser.

CME GUI Issue

Any success here? Have tried my last recommendations?

New Member

CME GUI Issue

Hi ,

Thanks a lot for your help , yes it worked

CME GUI Issue

Good that it helped.

Hall of Fame Super Gold

Re: CME GUI Issue

Which browser are you using ? Try firefox or older IE.

New Member

CME GUI Issue

IE 8

747
Views
0
Helpful
12
Replies