Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CME Help required

I want to make my Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(18), as callmanager. i have also download the CME full 4.3. My flash output is below mention

sh flash

-#- --length-- -----date/time------ path

1 38373256 Jun 3 2008 16:17:14 +00:00 c2800nm-advipservicesk9-mz.124-18.bin

2 1826 Nov 5 2007 14:30:04 +00:00 sdmconfig-28xx.cfg

3 6036480 Nov 5 2007 14:30:36 +00:00 sdm.tar

4 861696 Nov 5 2007 14:30:52 +00:00 es.tar

5 1164288 Nov 5 2007 14:31:10 +00:00 common.tar

6 1038 Nov 5 2007 14:31:28 +00:00 home.shtml

7 113152 Nov 5 2007 14:31:46 +00:00 home.tar

8 527849 Nov 5 2007 14:32:02 +00:00 128MB.sdf

9 1697952 Nov 5 2007 14:32:24 +00:00 securedesktop-ios-3.1.1.45-k9.pkg

10 416354 Nov 5 2007 14:32:46 +00:00 sslclient-win-1.1.3.173.pkg

14802944 bytes available (49213440 bytes used)

My flash has only 14 MB free space, please tell me shall i remove the SDM from flash or there is any other way to install CME software.

Whatelse I have to download for CME to work.

Please I m new to CME, please guide me

1 REPLY
Silver

Re: CME Help required

Here is the configuration guide for the Installing and Upgrading Cisco Unified CME Software follow the guide which will help you :

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeinstl.html

115
Views
0
Helpful
1
Replies
CreatePlease to create content