Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CME7 Extension Mobility Config

Hi,

im trying to configure extension mobility in cme 7 but i dont understand what a few of the parameters are that are shown in the cme admin guide. where alot of them are said to be optional and i dont configure them, the system doesnt work???

would it be ok if someone could please help me. check my config and give me some advice on tidying up my config please?

also, when i assign a seconf number to the second line on a users EM profile it doesnt appear on the phone?

and, can someone please explain how i would configure "dummy DN's" on the IP phones when they are logged out?

any advice would be appreciated.

many thanks

Dimitri

1 ACCEPTED SOLUTION

Accepted Solutions

Re: CME7 Extension Mobility Config

Hi,

Kindly find it below:

=====================================

voice logout-profile 2
number 5003 type normal

ephone  1

logout-profile 2

ephone  2

logout-profile 2

ephone  3

logout-profile 2

.

.

.

.

..

.

.

ephone  40

logout-profile 2

========================================

Like this you'll have the DN 5003 on the 40-ephones

Wish this be helpfull

Please rate successfull posts

Thanks

6 REPLIES

Re: CME7 Extension Mobility Config

Hi,

The phone DNs when logged out will use the DN configured under voice logout profile and when logged in, the phone will use the user profile DNs

Wish this be helpful

Thanks

New Member

Re: CME7 Extension Mobility Config

thanks for that.

so does that mean that if i have 40 physical IP Phones i must configure 40 voice logout-profiles and assign each voice logout-profile to a physical IP phone?

can i not have only 1 voice logout-profile with 40 DN's and they automatically get assigned to a phone?

thanks

Dimitri

Re: CME7 Extension Mobility Config

Hi,

Good thinking

Yes you can use the same logout profile for more than one phone

No need to create a 40 logout profile for each 40 phone

Wish this be helpful

thanks

New Member

Re: CME7 Extension Mobility Config

thats great news. thank you.

would it be possible for you to show me an example config for the voice logout profile with 40 DN's please?

Dimitri

Re: CME7 Extension Mobility Config

Hi,

Kindly find it below:

=====================================

voice logout-profile 2
number 5003 type normal

ephone  1

logout-profile 2

ephone  2

logout-profile 2

ephone  3

logout-profile 2

.

.

.

.

..

.

.

ephone  40

logout-profile 2

========================================

Like this you'll have the DN 5003 on the 40-ephones

Wish this be helpfull

Please rate successfull posts

Thanks

New Member

Re: CME7 Extension Mobility Config

Thank you very much!

Thats great.

559
Views
4
Helpful
6
Replies
CreatePlease to create content