That was the resolution. I downloaded the July 10th version and got passed the issue. After that I ran all the user imports then re-ran the CH, Schedul, etc. imports to reset the references away from my test users and back the actual users, now that they actually exist in the system.
3k users took about 2 1/2 hours to load FYI. I know you don't est. load times but maybe this will ball park it for people. The users came from Unity 4-2 that only allowed a 20MB max mailbox limit.
yes, I'm collecting real world usage statistics in the bottom of the help file there so if you want to zip up and shoot me your log I can add the stats (sans any site specific info of course) to that table of load/export times for folks to review.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...