Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Conference Connection

Hi all,

I need to change CCCADMIN password should i just change it in callmanager? or do i need to change it somewhere in conference connection 1.2.

Thanks!

1 REPLY
New Member

Re: Conference Connection

You need to change in Call manager

Step 1 In Cisco CallManager, select User>Add a New User.

Cisco CallManager opens the User Information page.

Step 2 Complete the following required fields:

* First Name-Use a descriptive name such as "CCC"

* Last Name-Use a descriptive name such as "JTAPI"

* UserID-Use a descriptive name such as "cccjtapi"

* User Password and Confirm Password-Enter a password and enter it again for confirmation

* PIN and Confirm PIN-Enter a PIN and enter it again for confirmation

* Enable CTI Application Use-Select this checkbox.

Step 3 Click Insert to create the user.

Cisco CallManager adds the user.

Step 4 Click Device Association in the left-hand column.

Cisco CallManager opens the Assign Devices subpage of the User Information page.

Step 5 Enter search criteria to list the desired CTI route point and CTI ports, or enter nothing to list all devices, and click Select Devices to list the devices.

Step 6 In the list that Cisco CallManager produces, select these devices:

* The CTI route point created for Cisco Conference Connection. See the "Creating the Conference Call CTI Route Point" section for more information.

* All CTI ports created for Cisco Conference Connection's use. See the "Creating the CTI Ports" section for more information.

Make sure you select the No Primary Extension radio button.

Step 7 Click Update to save your changes.

86
Views
5
Helpful
1
Replies