Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

conferencing problem

one of my customer is experiencing very strange conference problem and it is randomly happening but most of time when call volume is high.

when they do ad-hoc conference and if someone is trying to start another ad-hoc conference then those conferenc calls are mixed together and calls get dropped.

Any input will be appreciated

2 REPLIES
New Member

Re: conferencing problem

For a workaround to this problem, either change to the standard call control mode or upgrade engineering special build 1.2(1)

New Member

Re: conferencing problem

Hi,

I'm experiencing a similar problem: if we're in an ad-hoc conference and another party start an ad-hoc conference, the conferences get mixed... CallManager used is 4.1.3sr3a, conference bridges both on voice gateways (VG 3845 IOS: spservices 12.4.9T1) and on IP Voice Media Streaming service. At the time, I think we were on the hardware cfb (at the time, I was so overwhelmed with what happened I did not look which cfb we were connected on...).

I don't really understand your answer sadbulali, where do you change the call control mode? For which version of CallManager is this ES?

Regards,

Angelique

100
Views
0
Helpful
2
Replies