Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Configuration problem w/ incoming call

Hello there, just new here and w/ cisco CCME version 4.0

My scenario is, we have a C3845 named PBX01 w/ CCME v 4.0 connected to PSTN and C3845 named PBX02 w/ 7911G ip phones connected (local numbers are 1...) to it.

I want to configure local number 1038 to receive an incoming call from PSTN 701102001. the IP phone local 1038 is connected to PBX02. What i did is configured the translation-rule from PBX01 to translate incoming 701102001 to 1038 and point it to PBX02. when i test it by calling from outside, the local 1038 is ringing but i can't hear a dtmf tone and when the phone is pick up the connection is cut or we can't hear each other. I already included a voice class codec configuration on my dial peers but it is still not working. Pls check my attached file w/ includes some of my config in PBX01 and PBX02.

Pls assist me if my configuration in Translation-rule, in voice class codec and dial peers are correct.

thanks

1 REPLY
New Member

Re: Configuration problem w/ incoming call

For PBX01:

translation-rule 1

Rule 1 ^701102001 1038

voice-port 1/0/0:15

translate called 1

!

!

!

!

!

dial-peer voice 1038 voip

destination-pattern 1038

session target ipv4:10.10.254.1

dtmf-relay h245-signal h245-alphanumeric rtp-nte cisco-rtp

!

dial-peer voice 701102001 pots

destination-pattern 701102001

translate-outgoing called 1

incoming called-number 701102001

direct-inward-dial

port 1/0/0:15

!

dial-peer voice 10 voip

destination-pattern 1...

session target ipv4:10.10.254.1

dtmf-relay h245-signal h245-alphanumeric cisco-rtp

!

!

!

!

!

call-manager-fallback

max-conferences 12 gain -6

transfer-system full-consult

!

For PBX02:

voice class codec 1

codec preference 1 g711ulaw

codec preference 2 g729r8

codec preference 3 g729br8

!

!

dial-peer cor custom

name 9T

name 1...

!

!

dial-peer cor list moi-VIP

member 9T

!

dial-peer cor list moi-Local

member 1...

!

!

!

dial-peer voice 10 voip

destination-pattern 1038

voice-class codec 1

session target ipv4:10.10.254.1

!

dial-peer voice 10 voip

corlist incoming moi-VIP

corlist outgoing moi-Local

voice-class codec 1

session target ipv4:10.10.254.1

dtmf-relay cisco-rtp h245-alphanumeric h245-signal rtp-nte

!

ephone-dn 38

number 1038

caller-id block

corlist outgoing moi-VIP

228
Views
0
Helpful
1
Replies