Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

configure E1 card on voice gateway

Hi

I have CUCM 9 and Cisco 2801 voice gateway

There is 2 card on cisco 2801 : VIC2-4FXO and VWIC3-1MFT-T1/E1

I would like to know how I will configure the gateway in the CUCM (H323, MGCP ...)

Should I add H323 or MGCP gateway or something else ?

I also need to know how I will configure E1 card on the Cisco 2801 to handle CUCM PSTN incoming and outgoing call

 

I will apreciate if you help with some how to document

 

Thanks in advance

Regards

1 REPLY
Cisco Employee

Which protocol to use, is up

Which protocol to use, is up to you, you should know the requirements of your customer to define that.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
99
Views
0
Helpful
1
Replies
CreatePlease to create content