I am running CCM 5.1 and I want to enable call forward all to an external DID, such as a cell phone. I have created a route pattern for the external cell phone number but am having no luck with getting this to work. Any thoughts?
Re: Configuring CCM call forward to external number
1)I can call forward all to internal extensions using both the CFwdALL softkey and the Call Forward All field for the line configuration. However when I try to use the CFwdALL softkey and type in an external number it gives me a message "Your call cannot be completed as dialed...". I am getting this because only extensions begining with 2 or 3 can be dialed internally and you need to dail a 9 to get an outside dial tone.
If I enter the external number directly in Call Forwarding configuration for the line, I get the same message as above.
2) Block Offnet to Offnet Transfer is set to False.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.