I have a CUBAC 2.0 and CCM 7.0. Everything seems OK, except that when the operator logins it appears to him only 2 contacts from hundreds in CCM. Do you have any ideea where is the source if this problem?
If these are empty, please delete them both on the CCM and the AC client's pc. Then restart the TCD service on the CCM where it should be running to rebuild the AutoGenerated.txt file. Then check the contents of this file.
After this, restart the AC client. At this moment, it should build the CorporateDirectory.txt based on the AutoGenerated.txt from the CCM. Then check the contents of the CorporateDirectory.txt file on the AC client. This time it should contain all the names of users configured in CCM, which are associated to an IP phone.
I believe there is a little mistake. I have CUBAC, Cisco unified bussiness attendant console and CCM 7.0 , which is a linux device. I succed to solve the problem but only with the reinstall of the application.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...