Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Converting Unity to new hardware

My customer has Unity 4.04 UM. They want me to upgrade to a new server and add failover. Will I run into any issues when I build the new server and check that this is a Primary failover server when I run CUSPA and do my restore using DIRT if this option was not checked on the origional install. Thanks

3 REPLIES
Blue

Re: Converting Unity to new hardware

see the following link for replacing/converting a unity server with & w/o failover:

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_upgrade_guides_chapter09186a0080205a85.html

Re: Converting Unity to new hardware

I just did something similar on 4.05. All looks good so far. The restore went smooth

New Member

Re: Converting Unity to new hardware

I found the answer in the Install guide . It states that the question " Is this a primary or Secondary failover server?" is used to determin if SQL should be installed. I already have SQL installed so this sould not be an issue.

Thanks for the replies

98
Views
0
Helpful
3
Replies