Correct RAID setup for UCS-C200M2-VCD2 for CM8.6.2 & Unity Connection 8.5
We need to install CM8.6.2 & Unity Connection 8.5 in a server UCS-C200M2 virtualized, we have followed instruction for setting RAID but I guess something wrong happend because then installation of CM can not initiates, I attach screenshot in the step where we can not go further.
Server has 4 hard disks and put in RAID 6 array. Every hard disk has 931GB of capacity.
We installed ESXi 4.1 and cucm_8.6_vmv7_v1.5.ova template for installation,
Correct RAID setup for UCS-C200M2-VCD2 for CM8.6.2 & Unity Conne
Did you tell VM to boot from Server DVDROM drive? I usually upload .ISO files into ESXi data store and tell VM to boot from it.
Otherwise, I think you might be running into a known BIOS boot behavior with some of Cisco's OVA's. Go to VM settings in vSphere Client, second tab, and tell it to boot into BIOS next time, start VM, in the BIOS screen tell it to boot from CD-ROM first, save and exit BIOS.
These are the paths to get to each CCX logs through CLI. They may be helpful if you are having issues accessing RTMT or downloading logs through it.
If you want to download them you have to prefix "file get " and you can add one of the options (re...