Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Creating template in Call Manager

We are creating a template for a 7961 and have created the template but when setting up the phone, the new template does not show in the drop down box as an option. We have reset the device and it still does not show up. Is there anything additional that needs to be done to be able to select the new template or make it appear in the drop down box. We are running Call Manager 4.1 Thanks.

  • Unified Communications Applications
1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: Creating template in Call Manager

One thing to keep in mind here is ensure that the Phone is a 7961G and not a 796-GE. The template for both the phones are different and you cannot use the same for both the phones. To know the exact phone model, you can search for the Phone on CM Admin page and it will show wether this is a GE model or not

2 REPLIES
Gold

Re: Creating template in Call Manager

One thing to keep in mind here is ensure that the Phone is a 7961G and not a 796-GE. The template for both the phones are different and you cannot use the same for both the phones. To know the exact phone model, you can search for the Phone on CM Admin page and it will show wether this is a GE model or not

New Member

Re: Creating template in Call Manager

Thanks for your response. That was actually the issue. We got it just as you responded but either way, that was the solution. Thanks!

191
Views
0
Helpful
2
Replies