I have an issue with Cisco Unified Attendant Console Standard 10.5 (serverless version) where the Presence Bubble lights are intermittently not working for some users, if you check on a Jabber client they show status but on the Console Directory are shown as Unknown, this is only for some users as some show correctly.
The operator logged onto the console has entered their own credentials and they are enabled for Jabber and are also logged into the Jabber client on the same PC (is this valid?)
- > i would really ask you to see if the operator reports the same issue while being logged off from jabber and only tracking the user presence status from the CUAC console. I dont think this really would have a big difference as this should still work while jabber is logged in simultaneously. You may want to review the brief snippet of the cuac logs to see if you can find any thing specific to uid for which the presence is not responding with a status information.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...