During business hours, ring no answer calls are routed to an incorrect unity connection server. After hours ring no answer calls route to the local unity connection server. Where do I change it so it always goes to the local unity connection server?
This is controlled by the overflow numbers on the queue within CUBAC admin. That is typically a DN with a voicemail profile defined and CFA enabled. Review the overflow destination and then find that in CUCM to check the configuration. Ultimately it's CUCM that sends the call to voicemail, not CUBAC itself.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...