Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUBAC: Zone Paging Issue with Speed Dials and Console Dialing

We have a customer running CUBAC 8.6.2.611 and CUCM 8.6(2a)SU1.  They  have an external Bogen zone paging equipment connected to the phone  system.  So from a phone they dial extension 700, it answers with a beep  and then they enter 00, 01, 02 depending on what zone they want to  page.

The customer's CEO wants to "hide" the receptionist desk phone and have  the receptionist use CUBAC purely through keyboard shortcuts, and never  have to touch the phone.  The one issue is that in order for the zone  paging to work, the phone must be accessible because:

1. CUBAC/CUCM doesn't support pauses in speed dials (yet)

2. When dialing a number using only the keyboard and CUBAC, CUBAC  doesn't seem able to send any more digits after the call is completed.   So it will call extension 700 but unable to send any of the zone codes,  00, 01, 02.

Has anyone else run into this before?

Thanks,

Dan

Everyone's tags (1)
2 REPLIES
Cisco Employee

CUBAC: Zone Paging Issue with Speed Dials and Console Dialing

The zone codes are the manually entered by operation or expected to dial automatically somehow? CUEAC is not capable of sending DTMF in mid call to my knowledge.

Cisco Employee

CUBAC: Zone Paging Issue with Speed Dials and Console Dialing

You can send DTMF tones from the console by holding down the control key and pressing the numbers.

500
Views
0
Helpful
2
Replies
CreatePlease login to create content