I wanted to know can you someone point me in the right direction to some documentation that will show me how to configure Qos for a Cube router. The reason I ask it becuase I have a location in NYC that everytime they try to transfer a call the call drops. The guy who's place I took opend up a case with TAC and the TAC engineer said " As previously stated on my previous email, the running-config suggests that there is no QoS service-policy applied to any interface; hence, the router is not applying any kind of priority queuing and will treat the packets on a FIFO (First In First Out) fashion. However, I would like to get a show tech-support output from the router in question for me to get a better look at the overall setup for this router as well as its interfaces". I just sent the TAC engineer the info that he requested. I don't know if TAC wil help with configuring QoS but if they don't what is the easiest way to configure QoS on the interfaces. Thanks in advance for the help and I look forward to your replies.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4