CUC Live Record: the system is currently unable to record
I'm running Live Record with CUC 9.1. After dialed the Live Record number (9990) this message is received: The system is currently unable to record. Please try again later". What does the message means? Does CUC is out of space?
This feature works for some time. I followed these instructions:
To configure Live Record, first of all you need to create a DN on UCM:
1. UCM > Call Routing > Directory Number > Add New 2. Enter a DN, say for example 1188. Configure partition and CSS base on your environment 3. CFA to the voicemail pilot number
On CUC, you need to do the following: 1. CUC > Call Routing > Forwarded Routing Rules > Add New 2. Enter Live Record in Description field and select Save. 3. On the Edit Forwarded Routing Rule page, in the status field, select Active 4. Under Send Call To, select Conversation 5. In the Conversation list, select Start Live Record 6. Under Routing Rule Condition, select Add New 7. On the new Forwarded Routing Rule Condition page, select Dialed number 8. Select Equals and enter the Live Record pilot number, in my case the number is 1188. Then select Save.
by Panda eats bamboo
Thanks in advance Regards
__________________________________________________ Please remember to rate useful posts clicking on the stars below. LinkedIn Profile: do.linkedin.com/in/leosalcie
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.