we have UCM 6.1(5), CuciMoc 8.0.1 and OCS 2007 R2. CUCIMOC queries LDAP for every new number and all calls are logged to Conversation History window. Everything is OK for numbers that are stored in LDAP but the problem is with numbers that are not in LDAP. CUCIMOS sends a search request to LDAP which sends back 0 results in searchResDone packet. The call is logged in Conversation History as Unknown (Work) without any detail of Caller ID number. Why caller number isn’t displayed in Conversation History?
Numbers are definitely delivered to CUCIMOC. If a call is placed from Missed calls in Conversation History, correct number is dialed. Problem is that all missed calls are logged as Unknown (Work) and it is hard to know which missed call is placed. After connection is established (called party is ringing) number is shown in Active conversation window.
I cannot open a TAC case for CUCIMO (I don't have a valid service contract).
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...