I have cucimoc 8.0.2 registered with cucm 8.0.3 using tcp and udp. Now I want to try TLS. For this, I guess I need to make the cucimoc client interact with CAPF server to get the LSC (local significant certificate). Normally the cisco phones connect to CAPF server after the registration when the appropriate CAPF settings are configured for the phone. But the cucimoc is not initiating any attempt to contact CAPF server when I make similar configuration changes.
Did anyone encounter similar issue and has any solution to overcome it?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...