Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM 10.0 and Unity 8.0.3 (not Connection) - will it work ?

Hi

 

We are proceeding with migrating from CUCM 8.0 and Unity 8.0.3 (Windows, not Unity Connection) to CUCM 10, Unity Connection and IM/Presence.  Due to various pressure from business we had planned to migrate CUCM from 8 to 10 first and then follow up with Unity to Unity Connection 2-3 months later.  However, we have checked compatibility between Unity 8.0.3 and CUCM and found there is no support available to run 8.0.3 and CUCM 10.0 .  Cisco TAC case also confirmed the same.

 

Although it may be unsupported due to no specific testing - does it work ?  Has anyone operated in this setup with Unity 8.0.3 and CUCM 10.0 and if so were there any issues ?

 

Thanks a lot for any info that can be provided on this.

 

Euan

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

eebarkerWe currently are

eebarker

We currently are running that exact setup, we have CUCM 10.5.1 and Unity 8.0.3 and it's working fine with no problem.But we are in the process of moving all of our users to Unity Connection 10 and I hope to have that done in about another month.

2 REPLIES
New Member

eebarkerWe currently are

eebarker

We currently are running that exact setup, we have CUCM 10.5.1 and Unity 8.0.3 and it's working fine with no problem.But we are in the process of moving all of our users to Unity Connection 10 and I hope to have that done in about another month.

New Member

Thanks a lot.  we'd be the

Thanks a lot.  we'd be the same, migrating to UC 10 in 2-3 months after this migration.  It's simply we want/need to get to CUCM 10 first if at all possible.

 

Cheers !

 

Euan

82
Views
0
Helpful
2
Replies