Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

CUCM 7.0.2 on vmware

I have the following CD image 7.0.2.10000-18_recovery.iso. I would like to install this on a VMWare workstation version 5.5.x. This is what I will setup:

- create a new virtual machine with 2GB RAM and 80 of HDD

- choose Redhat Enterprise Linux ES 3,

- go through the installation as suggested by other in this forum,

Will that work? My system is Intel based system, Dell PowerEdge 2850.

Does CUCM version 7.0.2 installed on VMWware comes with a 50 user license?

Thanks in advance.

3 REPLIES
Cisco Employee

Re: CUCM 7.0.2 on vmware

You need to get in 1st place a full version of CUCM, that's the recovery CD available from CCO and it's not install media

Using the Disaster Recovery Disc

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/upgrade/7_0_1/upgrd701.html#wp51549

There is no install bootable media available to download, you need to order the actual physical media

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: CUCM 7.0.2 on vmware

Thank you for your feedback.

Let say that I have a full 6.1.1 iso image. Will it work with the method I described above?

Thank you very much for your assistance

Re: CUCM 7.0.2 on vmware

ya...go through the installation as mount the iso image as a cddrive...

351
Views
5
Helpful
3
Replies
CreatePlease to create content