Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CUCM 7.0 and OCS 2007 with RCC and redundant CUPS

Hi

Has anyone successfully deployed CUCM 7.0 and OCS 2007 for Remote Call Control (RCC) using redundant CUPS 7.0 servers?

I know CUPS can be clustered easily.

Can the route to the redundant CUPS on the OCS Front End server be configured using FQDN and both CUPS be configured with the same DNS alias?

Is it necessary to use a virtual IP for the CUPS and load balance it to the physical IPs? If so, what load balancers have you used?

Many thanks in advance

Regards

Stefan

1 ACCEPTED SOLUTION

Accepted Solutions
Red

Re: CUCM 7.0 and OCS 2007 with RCC and redundant CUPS

3 REPLIES
Red

Re: CUCM 7.0 and OCS 2007 with RCC and redundant CUPS

I haven't played around with "virtual IP".

A DNS SRV record should do the job.

Michael

http://htluo.blogspot.com/

Community Member

Re: CUCM 7.0 and OCS 2007 with RCC and redundant CUPS

Hi Michael

Thanks for the reply.

The FQDN option on the Next hop in our OCS is only possible when using TLS instead of TCP (see screenshot "ocs_rcc_static_route.jpg").

I guess it won't work with TLS and the DNS SRV record since the OCS will the the FQDN in the certificate.

Regards

Stefan

Red

Re: CUCM 7.0 and OCS 2007 with RCC and redundant CUPS

502
Views
0
Helpful
3
Replies
CreatePlease to create content