We're in the process of transistioning between DID blocks and would like to utilize Bulk Administration to complete the process.
Current Extensions: 8100-8199
Future Extensions: 5200-5399
Forward 8100 extension to new extension for 6 months to allow callers to still reach users at their old extensions.
Current Phone: 8101
Future Extension: 5220
--- Bulk Admin ran ----
Current Phone: 5220
Old Extension: 8101 (Forward All: 5220)
We've got the updating of the phones to the new extensions to complete successfully, but the old extensions are removed from the system. We can not add the old extensions back without pairing them with a mac address.
How can we create unassigned DNs with forward all destinations to the new extension.
Hopefully I explained this enough... Please let me know if I need to give more details.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...