I am basically a newbie in IP telephony. In my office,asterisk has been used for tha past few years. But we are planning to integrate cucm with the asterisk due to some advancement reasons. The task of doing that has been assigned to us (new joiners).
Heard that creating sip/h323 trunks between the two will lead to sme problems. Culd any one pls help me out with a step by step procedure to do the integration part.
Thanks in advance... Really appreciate any help...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...