Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM 8.5(1) and CUP 8.5(1) Upgrade to 9.x

Hello all,

We have CUCM 8.5(1), CUCN 8.5(1) and CUP 8.5(1) that we are planning on upgrading to 9.1(1) within the next few weeks.

The process for CUCM and CUCN I understand, however, with Presence being built into CUCM 9.x I am wondering how we migrate from CUP to IM&P.

Any information you can provide would be greatly appreciated.

Thanks,

Mark

6 REPLIES

CUCM 8.5(1) and CUP 8.5(1) Upgrade to 9.x

Presence will have to be upgrade right after CUCM has been upgraded and it should be the same version for both.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/upgrade/9_1_1/CUCM_BK_UAEC4331_00_upgrade-guide-cucm-91_chapter_010.html

Please rate useful posts.

Please rate useful posts.
Cisco Employee

CUCM 8.5(1) and CUP 8.5(1) Upgrade to 9.x

IM&P is NOT built into CUCM, it's still a separate server.

You upgrade CUCM in first place, and then upgrade CUPS to IM&P, using the same release as CUCM as now they're tied together.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

CUCM 8.5(1) and CUP 8.5(1) Upgrade to 9.x

That makes sense Jaime.  Maybe that's where I was confused.  I thought I read somewhere that parts of CUPS were now in CUCM, but perhaps that's all it was saying, is that they are tied together.

Thanks for the clarification!

Cheers,

Mark

Cisco Employee

CUCM 8.5(1) and CUP 8.5(1) Upgrade to 9.x

Most of the end user configuration has moved to CUCM side, but there's still a separate server on which IM&P runs.

And no more mix and match between versions, both servers need to be at the same SW level.

Meaning, if you upgrade one, you upgrade the other one as well.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

CUCM 8.5(1) and CUP 8.5(1) Upgrade to 9.x

George, thanks for the info.  Hopefully this will be my last post on the topic, as you helped me out already earlier in the week.

CUCM 8.5(1) and CUP 8.5(1) Upgrade to 9.x

No worries Mark, forum is to ask questions. good luck!

Please rate useful posts.

Please rate useful posts.
242
Views
10
Helpful
6
Replies